Armour - 4 x 1 Gallon

This floor finish is for those who want the highest gloss and wear with the least amount of labor. This 25% solids, metal cross-linked, polymer finish gives your floors a depth of gloss like you’ve never seen before. One coat does the job of two coats of an ordinary finish. This durable finish is detergent-resistant, and non-scuffing which makes it a real labor-saver. It is suitable for use on all floors and may be maintained by damp mopping. This product performs exceptionally well with either spray buffing or high-speed burnishing, and its excellent leveling makes it easy to apply.

DIRECTIONS

Recommended for use on all types of resilient tile flooring and properly prepared hard surfaces.

RESTORATIVE MAINTENANCE: Completely remove all old wax, finish and soil from floor surface. Floor surface must be clean, dry and free of residue before finish is applied. Rinse with clean water if necessary. Apply finish in uniform, thin to medium coats using a clean synthetic finish mop, microfiber mop or applicator system. Allow each coat to dry thoroughly before applying additional coats, usually 20-30 minutes. Elevated temperatures, heavy coats and humidity may extend dry time. A minimum of 4 coats of finish is recommended.

ROUTINE MAINTENANCE: Sweep large debris and dust mop. Damp mop or automatic scrub using a neutral cleaner. Buff or burnish the floor to enhance gloss as needed. Use Ultra-Chem Inc. Glide spray buff to extend time between re-coating. 

INTERIM MAINTENANCE: Sweep large debris and dust mop. Top scrub with a maroon pad to remove the top soiled layers of finish. Floor surface must be clean, dry and free of residue before finish is applied. Apply 1 - 2 coats of finish as directed above. 

NoteS: This product is a self-sealing finish, however, if tile is old, worn or porous, initially applying 1 -2 coats of a sealer will enhance gloss and long term performance. 

Slip resistance meets or exceeds standard, (ASTM D 2047-11) James Machine 0.5 minimum.